Snow load parameters of PC panels with different structures:

Snow load:The snow load caused by snow accumulation cannot be ignored, and the structure and lighting panels must meet this load. In snowy areas, which one is more suitable for installation, sunlight board or endurance board？

Snow load:Refers to the snow pressure applied to the top surface of a building or structure for calculation. The snow load on the roofs of general industrial and civil buildings is formed by accumulated snow and is a spontaneous meteorological load (natural load). The magnitude of snow load mainly depends on the snowfall amount in each region, roof form, geometric dimensions of buildings, and normal use of buildings based on meteorological data. The reference values for new, good, and fluffy snow loads range from 0.8 to 1.9 Kg/㎡, while the reference values for wet and compacted snow loads range from 2.0 to 8.0 Kg/㎡.

At present, the snow load value of taflenni polycarbonad generally accounts for 10% -30% of the total weight of the entire roof structure. Such a large snow load often causes significant deformation of various roof structures, especially in cold and snowy areas. After heavy snow, the roof structure not only undergoes significant residual deformation, but also sometimes suffers structural damage.

However, in the low recesses of the roof, it is more severe. Due to the accumulation of snow, there is a large overload in local areas, and the safety of the roof structure is generally low. Therefore, when designing the structure for the installation of solar panels and endurance panels, caution should be taken and the snow load value should be properly handled.